Digital Watchdog Starlight D1363D Technické informace stáhnout pdf (Strana 16)

The Network Type determines whether the system will act as a client or Access Point. Point-to-point

only is not supported. However, if you need a wireless bridge, see page 39, Creating an Ethernet

Bridge.

Operating mode determines if you are operating as 8011.b (2.4GHz DSSS), 802.11g (2.4GHz OFDM),

or 802.11a (5.x GHz OFDM), a mixed or homogeneous b/g network, and whether these modes use

turbo mode or not (802.11g and 802.11a only).

The Available Channel window is informational and will only change after a country is selected, then

the changes are activated (see Activating Changes below). The frequencies in this box will also be

affected by entries in the Custom Scan List.

WEP Setup

Selecting WEP Setup will present the box shown in fig 8. The Wireless Encryption Protocol will make

breaking into your system harder (but not impossible). By default it is disabled. Select the key size you

want (if you have Microsoft Windows clients, choose either 40 or 104 bit encryption). If you use the

same pass phrase and select Generate Key, your keys will all be identical. So you can have good keys

without the need to memorize them or write them down. Just use the same key size and pass phrase.

fig 8: WEP setup

Also select either Open System or Shared Key Authentication.

Activating Changes

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 101 102

Žádné komentáře

Digital Watchdog Starlight D1363D Technické informace Strana 16